 |
 |
|
 |
|
|
|
 |
|
|
|
|
| Construction materials,
Interior parts adhesives |
|
|
|
 |
|
| H-770 |
|
| One component chloroprene
rubber based adhesive |
|
 |
| Packages: |
|
3k, g15kg
3kgcan, 15kgcan |
|
| Colours: |
|
Pale brown |
|
| Performance: |
|
Stickiness 3,500mPa·s
Solid ingredients About23% |
|
| Use Advantages: |
|
Good adhesion to varietals
materials, Metal (steel, SUS, zinc plating metal,
AL e.t.c) with chroloprene rubber, plywood. |
|
|
|
|
|
|
 |
|
|
|
 |
|
| H-880 |
|
| One component chloroprene
rubber based adhesive |
|
|
| Packages: |
|
3kg, 15kg
3kgcan, 15kgcan |
|
| Colours: |
|
Pale brown |
|
| Performance: |
|
Stickiness 2,500mPa·s
Solid ingredients About 24%
Exclusion of formaldehyde |
|
| Use Advantages: |
|
Good adhesion to interior
(plywood, wallpaper e.t.c), chloroprene rubber. |
|
|
|
|
|
|
|
|
|
|
 |
|
| ECU-193 |
|
| One component Polyurethane-based
sealant moisture cure type |
|
|
| Packages: |
|
1kg, 12kg
sausage, 12kgcan |
|
| Colours: |
|
Milkywhite |
|
| Performance: |
|
adhesive strength
Flatsurface3.2N/mm2, Shear strength 4.0N/mm2,
Floor noise prevention 32.8db (23°C), Stickiness:600Pa·S |
|
| Use Advantages: |
|
For Wooden flooring
adhesive |
|
|
|
|
|
|
|
|
|
|
| Structural adhesives |
|
|
|
 |
|
| Y-900 |
|
| One component nitrile
rubber based superheating cure type |
|
|
| Packages: |
|
3kg, 15kg, 17kg
3kgcan, 15kgcan, 15kgUNcan, 17kgUNcan |
|
| Colours: |
|
black (viscous fluid) |
|
| Performance: |
|
nitrile rubber, phenolic
resin, curing requirement 200°Cx30min, Solid
ingredients 30% Stickiness 45,000cps
Good heat, water, oil, chemicals, impact resistance,
Good durability |
|
| Use Advantages: |
|
For adhere automobile
brake linings, metal parts suitable for spray use. |
|
|
|
|
|
|
|
|
|
|
 |
|
| Y-3600 |
|
| One component phenolic
resin based superheating cure type |
|
|
| Packages: |
|
3kg, 15kg, 17kg
3kgcan, 15kgcan, 15kgUNcan, 17kgUNcan |
|
| Colours: |
|
Red brown (viscous
fluid) |
|
| Performance: |
|
Curing condition 180°Cx30min,
Solid ingredients 32%
Stickiness 1,600cps
Good heat, impact resistance, Good durability |
|
| Use Advantages: |
|
For adhere automobile
brake linings, metal parts |
|
|
|
|
|
|
|
|
|
|
 |
|
| PL-605-50 |
|
| One component nitrile
rubber based superheating cure type |
|
|
| Packages: |
|
3kg, 15kg, 17kg, 200kg
3kgcan, 15kgcan, 15kgUNcan, 17kgUNcan, drums |
|
| Colours: |
|
black (High viscosity
fluid) |
|
| Performance: |
|
Curing condition 200°Cx30min,
Solid ingredients 45%
Stickiness 45,000cps
Good heat, oil, impact resistance, Good durability |
|
| Use Advantages: |
|
For adhere automobile
brake linings, metal parts
Stickiness: 43,000-47,000 (CPS/20°C) Roll coater/Extruder
Paint |
|
|
|
|
|
|
|
|
|
|
 |
|
| PL-605-30 |
|
| One component nitrile
rubber based superheating cure type |
|
|
| Packages: |
|
15kg, 17kg
15kgcan, 15kgUNcan, 17kgUNcan |
|
| Colours: |
|
black (Low viscosity
fluid) |
|
| Performance: |
|
Curing condition 200°Cx30min,
Solid ingredients 30%
Stickiness 1,000cps
Good heat, oil, impact resistance, Good durability |
|
| Use Advantages: |
|
For adhere automobile
brake linings, metal parts |
|
|
|
|
|
|
|
|
|
|
 |
|
| A-344-B |
|
|
| Packages: |
|
15kg, 17kg
15kgcan, 15kgUNcan, 17kgUNcan |
|
| Colours: |
|
Pale brown (Low viscosity
fluid) |
|
| Performance: |
|
Curing condition 160°Cx60min,
Solid ingredients 30%
Good for rust prevention |
|
| Use Advantages: |
|
For rust prevention
primer of brake shoe, Brake pad adhesive |
|
|
|
|
|
|
|
|
|
|
|
|
| Y-3800 |
|
| One component epoxy
based superheating cure type |
|
|
| Packages: |
|
20kg
pailcan |
|
| Colours: |
|
white |
|
| Performance: |
|
Curing condition 120°Cx40min,
Stickiness 500cps
Good flow property, retaining flexibility after
cured, good bonding |
|
| Use Advantages: |
|
For metal-metal, metal-glass
bonding |
|
|
|
|
|
|
|
|
|
|
|
|
| Y-3199 |
|
| One component epoxy
based superheating cure type |
|
|
| Packages: |
|
20kg
pailcan |
|
| Colours: |
|
gray |
|
| Performance: |
|
Curing condition 120°Cx40min,
Stickiness 500cps,
High Stickiness, Good weatherbility, hot water resistance. |
|
| Use Advantages: |
|
For Automobile head
lamp (Glass-Metal bonding) |
|
|
|
|
|
|
|
|
|
|
Hotmelt type adhesives
(other)
Potting |
|
|
|
 |
|
| HotMelt-M-470 |
|
|
| Packages: |
|
10kg |
|
| Colours: |
|
yellow Brown |
|
| Performance: |
|
hardness 45 (20°C)
Peel strength 160N/cm2
Abruption strength 80N/25mm Stickiness 11, 000cps
(190°C)
Softening point 140°C |
|
| Use Advantages: |
|
Low viscosity, good
cohesion with PP, Acrylic fiber, ABS, AAS, PC e.t.c |
|
|
|
|
|
|
|
|
|
|
|
|
| HotMelt-M-6179 |
|
|
| Packages: |
|
20kg |
|
| Colours: |
|
yellow Brown |
|
| Performance: |
|
hardness 30 (20°C)
Stickiness 5, 600cps (160°C) 4, 500cps (190°C)
Softening point 125°C |
|
| Use Advantages: |
|
Polysulfide based
Hotmekt, Potting material for electrical component |
|
|
|
|
|
|
|
|
|
|
| For sealing |
|
|
|
 |
|
| HotMelt-M-6158 |
|
|
| Packages: |
|
230kg, 20kg
230kgdrums, 20kgpailcan |
|
| Colours: |
|
black |
|
| Performance: |
|
Peel strength 39.2KPa
Abruption strength 12.7N/25mm
Application temp. range 100-140°C
Butyl-rubber based Hotmelt. |
|
| Use Advantages: |
|
For automobile's door
inside screen
Good for removability |
|
|
|
|
|
|
|
|
|
|
 |
|
| HotMelt-M-6280 |
|
|
| Packages: |
|
220kg, 20kg
220kgdrums, 20kgpailcan |
|
| Colours: |
|
black |
|
| Performance: |
|
Peel strength 12.0
(N/25mmXø4) Abruption strength 6N/ø4
Softening point 90°C Application temp. range
80-100°C
Butyl-rubber based Hotmelt. |
|
| Use Advantages: |
|
For automobile's door
inside screen
Good for removability |
|
|
|
|
|
|
|
|
|
|
|
|
| HotMelt-M-7500 |
|
|
| Packages: |
|
220kg, 20kg
220kgdrums, 20kgpailcan |
|
| Colours: |
|
black |
|
| Performance: |
|
adhesive strength
10.0 (N/25cm2) Abruption strength 70
(N/25mm)
Softening point 140°C Application temp. range
130-150°C |
|
| Use Advantages: |
|
Rubber-like elastic,
good stringless, good flexibility |
|
|
|
|
|
|
|
|
|
|
|
|
| HotMelt-M-3000 |
|
|
| Packages: |
|
220kg, 20kg
220kgdrums, 20kgpailcan |
|
| Colours: |
|
gray |
|
| Use Advantages: |
|
Butyl-rubber based
Hotmelt, door screen bonding to the vehicle door.
Soft hardness with low repulsive force, good cohesiveness
with rubber-like mechanical property urges easy
removable property. |
|
|
|
|
|
|
|
|
|
|
 |
|
| HotMelt-M-1000-G |
|
|
| Packages: |
|
17kg
17kgbox |
|
| Colours: |
|
gray |
|
| Performance: |
|
Softening point 130°C
Stickiness 32, 000cps (190°C) |
|
| Use Advantages: |
|
For automobiles interior,
good to adhere PP, PET, ABS, AAS, PMMA, PC e.t.c |
|
|
|
|
|
|
|
|
|
|
| Cohesion type |
|
|
|
|
|
| HotMelt-M-6104 |
|
|
| Packages: |
|
15kg
15kgbox |
|
| Colours: |
|
yellow Brown |
|
| Performance: |
|
Peel strength 402KPa
Abruption strength 58.8 (N/25mm)
Application temp. range 160-190°C
Low stickiness and suitable for spray use. |
|
|
|
|
|
|
|
|
|
|
|
|
| HotMelt-M-707 |
|
|
| Packages: |
|
15kg
15kgbox |
|
| Colours: |
|
Milkywhite--Milkyyellow |
|
| Performance: |
|
Stickiness 35,000cps
(190°C) |
|
| Use Advantages: |
|
Good for removability,
good flexibility
Can be used under wide range temperature (-20°C-90°C) |
|
|
|
|
|
|
|
|
|
|
 |
|
| MM-01 |
|
|
| Packages: |
|
10kg |
|
| Colours: |
|
amber |
|
| Performance: |
|
Hardness A:95, B:52
Tensile strength 7.96Mpa Elongation 500%
Bonding of PVC and Metal 82.3 (N/25mm)
Application temp. range 180-230°C |
|
| Use Advantages: |
|
Polyester based Hotmelt
for cast-molding, applied to electrical component |
|
|
|
|
|
|
|
|
|
|
|
|
